Baldor has a wide selection of high performance AC brushless servo motors, DC servo motors and stainless steel servo motors for the motion control industry.

	AC SERVO MOTORS
	BSM N-series The BSM N-series provide applications with low inertia to attain the highest acceleration capability — to position faster — to obtain the highest machine throughput. Baldor's motors are hard at work, increasing productivity, improving part quality, providing precision and reducing cost in many applications. This series provides continuous stall torques ranging from 4 Lb-In (0.4 N-m) to 354 Lb-In (40 N-m). Peak torques are typically 4 times continuous. This series has the lowest inertia to provide the maximum torque per package size.
	BSM C-series The BSM C-series has as standard, a “higher” inertia – thus providing an excellent match for equipment requiring “higher” inertial matching for the machine. This series provides continuous stall capability ranging from 1.2Nm (10 Lb-In) to 30Nm (256 Lb-In). Peak torques are typically three time continuous. Baldor's BSM C-series provides 50% more torque in a smaller size (50 mm/2 inches) shorter) compared to previous Baldor motors. The C-Series provides an economical package best used in applications with higher load inertias.
	BSM R-series The BSM R-series from BALDOR allow designers to make use of the benefits of brushless technology in smaller compact packages – less maintenance, quieter operation, faster acceleration. This series provides continuous stall torques ranging from 1.4 lb-in (0.16 N-m) to 11.2 lb-in (1.2 N-m). Peak torques are three times continuous stall.

SERVO RATED GEARHEADS

GBSM series Baldor's low backlash GBSM-series of gearheads mount easily and directly onto the BSM C-series and N-series servo motors. These gearheads are designed for servo applications requiring precision, durability, and long trouble-free operation. The GBSM-series are planetary gearheads, which provide very high power transmission capability, torque multiplication, speed reduction and inertial matching. These are high efficiency gearheads. The standard GBSM gearheads are available in five different case sizes, which fit directly onto the five sizes of Baldor’s BSM servo motors. Mounting takes less than 2 minutes.

STAINLESS STEEL BRUSHLESS SERVO MOTORS

SSBSM series Baldor's totally stainless steel SSBSM series of servo motors are designed for food, liquid, pharmaceutical, washdown, and high hygiene applications. They may be applied in harsh, corrosive environments. These motors are designed to handle IP67 and withstand 1500 psi washdown conditions. These stainless steel servo motors are offered in standard and low inertia designs for best machine inertial matching. Included in this quality design are lazer etched nameplate, FDA shaft seal, environmental protected stator with premium moisture resistant wire, and internal thermal over temperature protection. Baldor’s SSBSM products are designed to be durable.

	DC BRUSHLESS MOTORS
	BSM25/33 series Baldor’s BSM25 and BSM33 brushless DC motors with Hall sensors provide machine designers the benefits of brushless technology — quieter operation, smaller size, maintenance-free, longer life, and faster time to speed. They represent the best long-term investment.

DC SERVO MOTORS

DC servo motors Baldor's DC Servo motors were designed rugged to meet demanding requirements of industrial motion control. Available in diameters from 2.2 to 4 inches (55.8 to 101.6 mm) to provide continuous stall torques up to 56 Lb-In (6.3 N-m). They are designed to handle a continuous high temperature of 155°C for reliability and dependability. A wide variety of options are available for customization to meet your application needs - tachometers, encoders, brakes, mountings, shafts, windings, speeds, connectors, environmental. Standards available from stock.